====== SolidRun HoneyComb ======

===== SD card for firmware + file system =====

I like being able to have a working system and firmware on an SD card as replacing that in case of trouble is easy: pop-out, push-in, done.
With [[https://reviews.freebsd.org/D33168|Review D33168]] it is possible to create such SD cards for the %%HoneyComb%%.
While technically not needed to leave so much space, NXP's reserved space is this big.

  - Put the firmware on the SD card.  You can use %%SolidRun%%'s prepared default image.
  - Partition your SD card (da3 in my case):

<code>
gpart create -s GPT -l 67108864 da3
gpart add -i 1 -t efi -b 128M -s 256M da3
gpart show da3
newfs_msdos -F16 -L EFI -O EFI da3p1
...
camcontrol eject da3
</code>