Zedboard [FreeBSD WIKI]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== FreeBSD on Zedboard =====
The Zedboard is an evaluation board for Xilinx Zynq-7000 series System-on-a-Chip.  The Zynq-7000 is an FPGA combined with an ARM Cortex-A9 core and a set of standard peripherals.
  * [[http://www.zedboard.org|Official Zedboard site]].
  * [[http://www.xilinx.com/products/silicon-devices/soc/zynq-7000/index.htm|Xilinx Zynq-7000 product page]].
  * [[http://www.thomasskibo.com/zedbsd|Thomas Skibo's FreeBSD on Zedboard page]].
==== SDCARD images ====
SD card images for %%FreeBSD%% 12-RELEASE on the Zedboard can be found on [[http://www.thomasskibo.com/zedbsd|Thomas Skibo's FreeBSD on Zedboard page]].

Also, [[/TimKientzle]]'s system build tool, [[https://github.com/kientzle/Crochet-FreeBSD|Crochet]], can build Zedboard SD card images.
The following describes how to manually build an SD image for Zedboard:
==== Building FreeBSD for Zedboard ====
Zynq/Zedboard support is in -CURRENT and 12-STABLE.  To build world and kernel for the Zedboard:

<code>
make TARGET_ARCH=armv7 KERNCONF=ZEDBOARD buildworld buildkernel
</code>

==== Building u-boot.img and boot.bin ====

The Zedboard needs several files in a boot partition.  The file boot.bin is the first executable the Zynq chip boots.  It initializes the Zynq and then hands over execution to u-boot.img.  These
files can be built by the port sysutils/u-boot-zedboard.  Once built, the files will be installed in /usr/local/share/u-boot/u-boot-zedboard.

==== Building an SDCARD image ====
=== Create SD card image ===

<code>
dd if=/dev/zero of=SDCARD.img bs=1m count=2000
mdconfig -f SDCARD.img -u 0

gpart create -s MBR md0
gpart add -s64m -t \!14 md0
gpart set -a active -i 1 md0
newfs_msdos -F 16 /dev/md0s1

gpart add -t freebsd md0
gpart create -s BSD md0s2
gpart add -t freebsd-ufs md0s2
newfs /dev/md0s2a
tunefs -n enable /dev/md0s2a
</code>

=== Mount filesystems ===

<code>
mkdir /mnt/boot /mnt/armroot
mount -t msdosfs /dev/md0s1 /mnt/boot
mount /dev/md0s2a /mnt/armroot
</code>

=== Populate root and boot partitions ===
From within the source directory:

<code>
make TARGET_ARCH=armv7 KERNCONF=ZEDBOARD DESTDIR=/mnt/armroot installworld distribution installkernel
</code>

=== Copy u-boot files to the boot partition ===

<code>
cp /usr/local/share/u-boot/u-boot-zedboard/{boot.bin,u-boot.img} /mnt/boot
</code>

=== Copy EFI loader to boot partition ===

<code>
mkdir -p /mnt/boot/EFI/BOOT
cp /usr/obj/usr/src/arm.armv7/stand/efi/loader_lua/loader_lua.efi /mnt/boot/EFI/BOOT/bootarm.efi
</code>

=== Final tweaks ===
Copy the DTB file to boot partition:

<code>
mkdir /mnt/boot/dtb
dtc -I dts -O dtb /usr/src/sys/dtb/arm/zedboard.dts > /mnt/boot/dtb/zedboard.dtb
echo "fdtfile=zedboard.dtb" > /mnt/boot/uEnv.txt
</code>

Touch /firstboot:

<code>
touch /mnt/armroot/firstboot
</code>

=== Unmount file systems ===

<code>
umount /mnt/boot
umount /mnt/armroot
mdconfig -d -u 0
</code>

=== Copy to an SD card ===

<code>
dd if=SDCARD.img of=/dev/da0 bs=1M
</code>