This is an old revision of the document!
installing a new machine at NYI
(MarkLinimon note: WIP; needs some information from YahooNetinstall)
all machines
- set up the BIOS:
- TBA
- figure out the MAC address
- clone an entry in
/usr/local/etc/dhcpd.confand use that MAC address
machines which will pxeboot
- make sure
rsw02XXhas the the interface's vlan set to portsbuild (e.g.) - make sure the
/usr/local/etc/dhcpd.confentry for your machine has entries for bothfixed-addressandoption root-path - boot the machine
- format the drive
- edit drive information into files in (e.g.)
/home/linimon/pxeroot/amd64-9/conf/<ipaddress>/etc/:fstabrc.conf
- reboot the machine
- profit!
machines which will boot from hard drive
- if you have not done so already:
- create a directory for pxebooting, something like
/home/linimon/pxeroot/amd64-install-9.0 - copy over the
/home/linimon/pxeroot/amd64-install-9.0/getbootableisoscript to it and edit for that directory and release sudo sh -x ./getbootableiso- (see BradDavis's writeup for more detail of what
getbootableisodoes)
- make sure
rsw02XXhas the the proper interface's vlan set to install - make sure the
/usr/local/etc/dhcpd.confentry for your machine has entries for neitherfixed-addressnoroption root-pathso it will boot from the default install vlan - reboot the machine
- do the install
- profit!