arm:raspberry_pi_camera

This is an old revision of the document!

Note: This works after r290171

Test on a RPI2 using this image: http://download.raspbsd.org/FreeBSD-armv6-11.0-RPI2-290142M.img.gz

Setting up the Raspberry Pi Camera

  • Install the Raspberry Pi Userland tools:
    • pkg install raspberrypi-userland (misc/raspberrypi-userland)
  • Enable the video core and up the RAM allocated to the GPU, by adding the following to /boot/msdos/CONFIG.TXT:
    • start_x=1
    • gpu_mem=128
  • Reboot
  • Test:
    • raspistill -t 100 -n -o snap-`date +%Y%m%d-%H%M%S`.jpg
  • arm/raspberry_pi_camera.1567805524.txt.gz
  • Last modified: 2019/09/06 21:32
  • by LorenzoSalvadore