Setting up the Raspberry Pi Camera

This is an old revision of the document!

Note: This works after r290171

Test on a RPI2 using this image: http://download.raspbsd.org/FreeBSD-armv6-11.0-RPI2-290142M.img.gz (This link is broken)

Install the Raspberry Pi Userland tools:
- pkg install raspberrypi-userland (misc/raspberrypi-userland)
Enable the video core and up the RAM allocated to the GPU, by adding the following to /boot/msdos/CONFIG.TXT:
- start_x=1
- gpu_mem=128
Reboot
Test:
- raspistill -t 100 -n -o snap-`date +%Y%m%d-%H%M%S`.jpg