example.dts [FreeBSD WIKI]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<code>
...
...
cpus {
        #address-cells = <1>;
        #size-cells = <0>;

        PowerPC,8555@0 {
                device_type = "cpu";
                reg = <0x0>;
                d-cache-line-size = <32>;       // 32 bytes
                i-cache-line-size = <32>;       // 32 bytes
                d-cache-size = <0x8000>;        // L1, 32K
                i-cache-size = <0x8000>;        // L1, 32K
                timebase-frequency = <0>;
                bus-frequency = <0>;
                clock-frequency = <0>;
                next-level-cache = <&L2>;
        };
};

memory {
        device_type = "memory";
        reg = <0x0 0x8000000>;  // 128M at 0x0
};

soc8555@e0000000 {
        #address-cells = <1>;
        #size-cells = <1>;
        device_type = "soc";
        compatible = "simple-bus";
        ranges = <0x0 0xe0000000 0x100000>;
        bus-frequency = <0>;

        ...
        ...

        i2c@3000 {
                #address-cells = <1>;
                #size-cells = <0>;
                cell-index = <0>;
                compatible = "fsl-i2c";
                reg = <0x3000 0x100>;
                interrupts = <43 2>;
                interrupt-parent = <&mpic>;
                dfsrr;
        };

        ...
        ...

        enet0: ethernet@24000 {
                #address-cells = <1>;
                #size-cells = <1>;
                cell-index = <0>;
                device_type = "network";
                model = "TSEC";
                compatible = "gianfar";
                reg = <0x24000 0x1000>;
                ranges = <0x0 0x24000 0x1000>;
                local-mac-address = [ 00 00 00 00 00 00 ];
                interrupts = <29 2 30 2 34 2>;
                interrupt-parent = <&mpic>;
                tbi-handle = <&tbi0>;
                phy-handle = <&phy0>;
        };
...
...
</code>