Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. We need to express the following * How to install the uboot bits * UFS partition and size * MSDOSFS partition and size * EFI partition and size * Reserved space at the beginning (for dd'ing in blocks) * Mix of the above Use UCL to express: * List of files go to a destination via copy or dd.. * Partition layout / types / sizes Something like <code> config_version = 1 board = "All BeagleBone Boards" reserved = "2MB" hasFat = "yes" fatType = "fat32" fatSize = 2MB fatPartType = "!16" fatFiles = ["u-boot.img" "uBootEnv.txt" ] hasUFS = "yes" fixedData = "yes" fixedSize = 128k fixedLocations = [ 0x100, 0x200, 0x300 ] fixedFile = "u-boot-spl.img" </code> ubootmetadata.txt Last modified: 2018/02/02 15:42by WarnerLosh