Wifi Ideas Page

This is an old revision of the document!

Suggested Summer of Code project idea

Technical Contact: adrian@, sam@

WPA2 is the authentication protocol defined as part of the IEEE 802.11i specification. This protocol is now commonly used to authenticate wireless stations to access points. Part of this protocol is the ability to pre-authenticate a station with one or more access points so that roaming can happen quickly. FreeBSD lacks support for this aspect of the protocol in the hostapd program used to construct a WPA-enabled access point. This task would port the Linux code that exists to support pre-authentication in hostapd. This mostly involves rewriting some user-mode multicast code and testing the result.

Good knowledge of C.
Wireless networking fundamentals.
WPA-capable wireless network setup.

Suggested Summer of Code project idea

Technical Contact: adrian@, freebsd-wireless@freebsd.org

Extend the net80211 rate control API to be 802.11n aware. This includes:

Teaching it about multiple TX rate attempts (eg what ath(4) hardware supports;
Teaching about MCS rates;
Taking aggregate frame sizes into account (to select suitable rates for A-MPDU);
Make decisions about frame protection - ie, correctly set RTS or CTS-to-self for 11g and 11n interoperability with legacy networks;
Be SMPS aware - ie, if the peer is doing SMPS, restrict the MCS rate correctly to 0-7 (static SMPS) or prefix all frames with RTS (dynamic SMPS);
Do HT/20 and HT/40 selection;
Do STBC selection;
Select short or long guard interval.

The ideal student will have a supported 802.11n chipset (Intel, Broadcom, Atheros) and be familiar with basic wireless concepts and C programming. If in doubt, please email freebsd-wireless@freebsd.org to ensure your 802.11n NIC is supported in FreeBSD-HEAD.

Suggested Summer of Code project idea

Technical Contact: adrian@, sam@

Build a “packet fuzzer” tool that can be used to build test suites to improve reliability of the 802.11 code against garbage data. There are various tools out but we're not aware of any good ones that work with 802.11 and are generally available. The basic idea is to write a packet injector/playback tool that's driven by a scripting language. Then you need to build up a database of test cases. It's also possibly important to do time-based playback.

Good knowledge of C.
Wireless networking fundamentals.
WPA-capable wireless network setup.

Suggested SoC project idea

Technical Contact: freebsd-wireless@freebsd.org

The wtap interface simulates enough of a wireless interface to allow for mesh (802.11s) testing. It would be nice to extend this to support the other operational modes (sta, hostap, adhoc).