H6 Supported Boards
Building an Image
- See the Allwinner boot process page for details how the board starts.
- See that same page for details how to modify a GENERICSD image for use with a Pine H64.
For the quickest of quick-starts without understanding, follow these steps:
- Obtain a bootable – for some other SBC – aarch64 image, such as FreeBSD-13.0-RELEASE-arm64-aarch64-ROCK64.img
- Install sysutils/u-boot-pine-h64
- Write the bootable image to a micro-SD card
- Write the u-boot code to the micro-SD card
- Place card in the Pine H64 SD-card slot and power on the board
dd if=FreeBSD-13.0-RELEASE-arm64-aarch64-ROCK64.img \ of=/dev/da0 bs=1M conv=notrunc dd if=/usr/local/share/u-boot/u-boot-pine-h64/u-boot-sunxi-with-spl.bin \ of=/dev/da0 bs=128k seek=1 conv=sync